PET Pellets crystallizer/Infrared Rotary Dryer/Plastic crystallizer/ Plastic Desiccant Dehumidifier/Plastic dryer/Infrared crystal dryer

Products Details

Raw Material PET Pellets (Made by Recycled flake) image1
Using Machine LDHW-600*1000 image2
Crystallized Temperature set 200℃
Crystallized time set 20mins
Final material Crystallized PET Pellets image3
>>At first step, the only target is to heat up the material to a preset temperature. Adopt relatively slow speed of drum rotating, the Infrared lamps power of the dryer will be at a higher level, then the PET pellets will have a fast heating till the temperature rises to the preset temperature. >>Drying &Crystallizing step Once the material gets to the temperature, the speed of the drum will be increased to a much higher rotating speed to avoid the clumping of the material. At the same time, the infrared lamps power will be increased again to finish the drying. Then the drum rotating speed will be slowed down again. Normally the drying process will be finished after 15-20mins. (The exact time depends on the property of material) >>After finishing the drying processing, the IR Drum will automatically discharge the material and refill the drum for the next cycle. The automatic refilling as well as all relevant parameters for the different temperature ramps is fully integrated in the state-of-the-art Touch Screen control. Once parameters and temperature profiles are found for a specific material, theses settings can be saved as recipes in the control system.
Heating. Heating granules and regrind material prior to further processing (e.g. PVC, PE, PP,…) to improve throughput in the extrusion process.
Crystallization Crystallization of PET (Bottle flakes, granules, flakes), PET masterbatch, co-PET, PBT, PEEK, PLA, PPS, etc.
Drying Drying of plastic granules, and ground material (e.g. PET, PBT, ABS/PC, HDPE, LCP, PC, PP, PVB, WPC, TPE, TPU) as well as other free-flowing bulk materials.
High-input moisture Drying processes with high input moisture >1%
Diverse Heating processes for the removal of rest oligomers and volatile components.
>> Supply Experienced engineer to your factory to help installation and material test running >> Adopt aviation plug, no need to connect the electrical wire while the customer get the machine in his factory. To simplify the installation step >> Supply the operation video for installation and running guide >>Support on line serviceInstant start-up and quicker shut down Uniform crystallization No pellets clumping & stick Carefully material treatmentUp to 60% less energy consumption than conventional drying system No segregation of products with different bulk densities Independent temperature and drying time set Easy clean and change materialExperienced engineer will make the test. Your employees are cordially invited to participate in our joint trails. Thus you have both the possibility to contribute actively and the opportunity to actually see our products in operation.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours